SDOT is limiting most construction work in busy areas from June 8 to July 7, 2026, to help keep Seattle moving during the FIFA World Cup.
What the Construction Pause means for you
By June 7, you may need to stop working and clear the right-of-way if your project restricts mobility for people driving, walking, taking transit, or riding bicycle or scooters.
The Construction Pause applies to you if you have a Street Use permit and your project is located:
- in the downtown core
- near the stadiums
- on transit routes throughout the city
If your project is in the Construction Pause area and will require restoration, you must meet restoration standards for either interim or final paving.
- Non-arterial streets: At least 2 inches of Hot Mix Asphalt (HMA) over 4 inches of crushed rock.
- Arterial streets: At least 6 inches of Hot Mix Asphalt (HMA) over 6 inches of crushed rock.
Work with your Street Use inspector to make sure your project meets these standards. Your restoration work must stay safe and functional until your project is complete.
Why is SDOT doing this
The Construction Pause will help reduce traffic congestion and make it easier for people to get around the city while we host these major matches. Please use our Construction Pause map to check and see if your project might be affected.
What you can do to keep working
SDOT knows this affects your schedule, so they have also created short windows in mid-June where you might be able to do quick work.
Additionally, if your job site also fronts a street not covered by the Pause, SDOT encourages you to shift work if you’re able. You won’t need an exception to work on unaffected streets, but you may need to update your Street Use permit.
Get more information about the Construction Pause
To:
- learn more about the Construction Pause
- see if your project is in the Pause area
- find out how to apply for an exception
Visit the SDOT Construction Pause web page.